Quote:
|
Originally Posted by Fractured1
1st I would check my leads going into the pump with a test light or meter.If in fact you have power there make sure your ground is good to the pump...also just because the pump is new don't rule out ...check it with leads directly from battery...not a real difficult circuit to trouble shoot...good luck
|
After i got the new pump, and i installed it and it didnt work. I checked the wires with a multi meter and got nothing. so i straight wired the positive wire to the battery. it worked. so my ground connection is ok. its something to have to do with my positive wire coming from where ever the power is sent after it runs the wipers up. cause like i said when i hit the mist it runs the wipers accrost but no power gets to the sprayer. i dunno wat 2 do.