[adamy1]

look for those rubber groumets that can bee seen on the passenger side of the engine compartment...one should be either next or below the battery....remove the groumet and feed your wires thru it...the wires should appear inside the passenger compartment behind the glove box area..put the groumet back in place to prevent any exhaust fumes and gases entering the passenger compartment...as for connecting the fog lights to the high beam, you will be defeating the purpose of using fog lamps. never use you high beams in the fog or you will not able to see far due to the white out condition ( a condition that blinds the driver with nothing but white being reflected back to the driver...something like driving in the snow)....the fog lamp should come with its own wiring kit which includes a switch...use that...as for the power source, use the battery if the kit has a inline fuse...or you will have to tap into another power source...