2000 Windstar Dead Battery
Hi All
I am working with a 2000 Winnie with a repeat dead battery after sitting overnight or for a few days. New battery, Alternator producing between 13.6 and 14.1 under all different load conditions, All battery leads and ground clean. No obvious draws - reading lights, glove box light etc.. I have tried to measure cold draw (no expert) and I believe I am getting about 220MA which I don't think is much. I have pulled every fuse and cannot change that draw. I had Ford check the Vin number for the PCM re-calibrate TSB and no luck there. I am good and totally stumped. Looking to charge the battery so it can be tested again and also to pull the alternator for a bench test at autozone.
Any other ideas?
Thanks
|