Well, I'd like to thank you guys for the tips..but here's what just happened I went under the truck to find the vac switch, I could not even get to the top of the transfer case. NO room at all. Is it located to the side or something? Well any way after looking around under the truck and I found a electrical conn. on the side of the transfer case I cleaned it and made sure it was pluged in tight. Note...I did nothing else..Then when I was checking the 4x4 buttons to see if they worked I had the following happen...1.I can only get the truck in 4w auto and 4w hi, when I try to put it into 4w low or 2w the lights flash and go back to 4w hi...2, I can hear the motor on the transfer case making a buzzing sound and 3, I hear a clicking sound coming from the passenger side under the dash, and when I started to back out of the drive it would hardly roll and was locking up and making a clunking sound, this also happened when I was pulling forward. Holy crap what the....is going on with this thing. Any futher help would be cool.
|