|
Re: no spark at plugs
Make sure your distribitor is connected to the Electonic Spark Control. Look for 4 wires and a harness that goes to the firewall. You will not have spark is this harness is disconnected.
You may also overide the ESC by disconnecting the distribitor from the ESC (Electronic Spark Control).Then on the wires that go to the distribitor run a 14 guage jumper wire across the "A" and "C" terminal. If this gives you spark, then the ESC is shot. I would then suggest buying a four pin Distribitor. You may find them new on EBay for about $90 bucks if your parts store is asking for 150-200 bucks.
|