Quote:
|
Originally Posted by iskiuskiweski
Maybe someone can help me. I have one of these systems already installed, I think. When I purchased my Rodeo I noticed a switch under the dash, but I don't know what it does. It is just a simple on/off toggle with light gauge wiring to it. I have not traced the wiring yet, just not enough time but it is obviously aftermarket equipment. Also I only have the original remote that I assume can from the factory with the Rodeo. There is also an antenna on the drivers side of the windshield, about six to eight inches long that runs along the pillar (factory or aftermarket?).
So if there is one of these systems installed, is it possible for it to use the standard factory remote?
Let me know what you think fella's.
|
That switch and that antenna are both aftermarket. Look underneath your dash and follow the wires from the switch to the brain unit of the alarm to figure out what type it is, and just buy that remote. Chances are they disconnected the factory system when they installed the aftermarket already though. OF course, you can always look @ the Isuzu FAQ's and try program a remote to the ar to see if it'll work, but Im gonna guess it wont. If you decide you dont want the alarm anymore, whatever you do, DONT' just start ripping every box, switch, relay, out. I did that on a Samurai and it stopped starting up until I figured out which wire I needed to reconnect after hours of hair pulling.