[firelikeiya]

I had the same problem with my Sport Trac. If you remove the plastic housing from around the steering column you should see a wiring harness that connects to the top half of the multifuntion switch. When this happened to my truck the little plastic clips that actually hold the the wiring harness to the multifunction switch broke so when I put my steering wheel all the way up it would push the harness in to the multifunction switch and everything would work great but when I adjusted the steering wheel down the tension on the wires would pull the harness out. I fixed this by applying a little bit of gasket maker around the harness clip and inserted it into the multifunction switch. I drove around for a day or so with the steering wheel adjusted all the way up and this kept the wiring harness pushed in place while the glue dried. It has been almost a year and it has held up fine for me.