|
Re: Uhoh, Not Piston Rings, Please!?
its probably valve seals. the easiest way to be sure your piston rings are good is to do a compression test. buy a tester at autozone ($25) test each cylinder and then put a squirt of oil in each cylinder and check them again. i forget what the numbers should be but the bigger the difference between the dry and wet readings the worse condition your rings are in
__________________
-1stGenRocks-
95 Tsi AWD: 6 bolt, DSMLink, 880's, ACT 2600, lightweight flywheel, AGX's, Dropzone springs, poly motor mounts and suspension bushings, 3 inch turboback, gus modded 1g BOV, hardpipes, drilled & slotted rotors, 17's
plans: bastard 20g, water/meth injection NO FMIC
|