[Forkliftguy]

I would first check to see if both lock/unlock switches work. If none of them work, the problem could be with the harness at the relay module (you said they do lock when the car is put into drive, so you can rule out a bad fuse). I don't recall where it is located but you can easily find it by listening for the relay module to click when the doors lock when you put the car in drive. You can also pull the lock/unlock switch out from the door (it should just pop out) and see if the harness for the switch is plugged in properly. Use a multi meter and check to make sure the orange wire on the plug is showing 12volts. The white wire and the blue wire should only have 12volts present when you are pushing the switch to lock or unlock the doors (white=unlock, blue=lock). Start with that and let me know how you make out.


Marc