[travagliante]

Hello,

Okay we will start out with the first question..

1. all you need is a 88-91 si/or ex tranny-which is the best choice, nothing else needed..... Except si axles, linkage will work(stock that is)

2.MPFI conversion, not to hard as long as you take your time, you will need a pg7, or pm6 ecu also, and hopefully you have a distributor on the zc.

3. Your stock header should work fine, oh wait or do you have a manifold?? with a downpipe? Well get a header for a 88-91 civic/crx.

4.hmmm a zc flywheel should work if you have it otherwise you can use your stock one. With a 88-91 si clutch.

5. rear disk conversion, not to hard, as long as you take your time.... Front disc conversions that are popular are from a 90-93 teg, front brakes+calipers=bigger, need them, pm me and make an offer and there yours.....

6.There are kits on the net for bushings. Do a quick serach...Most 90-93 integra, 93-97 del sol, and 94-00 integra suspension parts bolt up as well as some 92-00 civic stuff does too.