|
Heater core problems
You have to unhook the complete box. I was able to remove the heater core but I bent it a little getting it out. there is a little ledge you have to get under to put the core back in. You might be able to lossen all the bolts and that should give you about an 1-2 inches of extra room. then you might be able to slip it in. It was recommended to me to change both if you change the one, but that is entirely up to you.
Did you get your dash off yet?
If you didnt let me know I might be able to make it a little easier on you. It is quite the task.
|