[BlazerLT]

Originally Posted by OldieButGoodie92

Ok I recently did clean my egr valve and replace the gasket.

Did you clean it with throttle body cleaner and made sure the pintle was seating properly before reinstalling it?

Originally Posted by OldieButGoodie92

How do I go about checking for leaks in the plenum? (soapy water?)

I meant looking into the IMTV valve under the vortec plate INTO the upper plenum.

Originally Posted by OldieButGoodie92

Where is my IAC located? on top od the intakeplenum?

Please see the picture in my last reply.

Originally Posted by OldieButGoodie92

Is the IMTV that little round sencor under the vortec plastic? And are you implying maybe my spider, i think they call is faulty, because i payed $500 to repair this 2 years ago.

Yes, the round thing is the IMTV is a valve under the vortec plate. Remove it and take a good flashlight and look into the upper plenum and smell for gas and look for clean golden areas that were washed clean from the leaking Injector in the small area you can see on the passenger side area inside the plenum.

If you smell gas it is your internal fuel line kit or the CPI injector has gone again.

Originally Posted by OldieButGoodie92

And finally where did u find that bad ass air intake I cant find one any where? How much did it cost you if u dont mind me asking?

Ebay is the best place to find these intake.

Here is the cheaper ones that do very well for the cheap price they have:

http://search-desc.ebay.com/92-95-bl...trypageZsearch

And here are some K&N's like mine for our year.:

http://www.knfilterchargers.com/sear...x?Prod=57-3009

Ebay listings for the K&N:

http://search-desc.ebay.com/57-3009_...QsosortorderZ1

Originally Posted by OldieButGoodie92

Sorry so many questions I am very interested in getting my truck back to normal, any help would be greatly appreciated, I think I can trust ur judgement blazerLT u seem like a very smart guy when it comes to blazers!

Thank you, I am only here to help.