My '97 4x4 also has two cutouts in the valance, but the tow hooks extend through that opening and there is no room for lights. I was hoping to keep the tow hooks.
Also if the lamps were powerful enough in that position, the heat they would throw off would undoubtedly melt the rubber facing edge protector that goes around the full brush guard that sits in front of the holes.
I was hoping to locate an aftermarket valence with four holes, somewhat like on the Olds Bravada, where the foglamps install in the valance panel at the far edges of the front end.
Street Scenes had such a valance, but it extends downwards and cannot be used with a brush guard that mounts on the frame rails.
Thanks...