|
Re: So Confusing
People get mad when it's a question asked all the time, if it hasn't been asked in a while then usually people will help out. Otherwise there is a Search function on the board where you can select which forums to search thru. Don't find it in one, then search another. Almost any question you could possibly think of has been answered time and time again. And for people who have been here a long time (years), it gets annoying having to read through the same questions over and over again. and chances are by searching instead of asking a question again; you'll find a lot more detailed info already given than you'll get from asking again. But back to your question:
Do you have that part of the motor jacked up? I'm assuming you do, so you might have to jack that side of the motor up a tiny bit more to try to get the mount and motor lines up perfect and evened out to get the bolts out. If they still won't budge then try some penetration spray . If it's at the point where the bolt is almost out and is still stuck you may have to tap it out with a screw driver and a hammer. Otherwise, you may have crossthreaded the bolt already. Hope I've helped.
|