Quote:
|
Originally Posted by MrBB
On my car I ran a power wire through the hole in the firewall where the underdash harness exits to the engine compartment. I simply took a sharp knife and made a small hole in the rubber boot that seals around the harness in the firewall. I made the hole only large enough for the wire to slip through but still have a good seal around the wire. (an extra hand to hold a flashlight never hurts) So far it works great for me. Hope this helps! And good luck!
|
agreed. use a little black rtv to make a good seal around the wire.
and as a side note, it's 'appreciated' =)
__________________
-Andy
'89 Mustang 5.0 - How fast? i'll know this weekend.
'86 Mustang LX - Shortblock is built, now for the rest of it.
"Put the subject before the verb, hmm? Fail this class, you will."
-Yoda teaches english class.
|