|
Re: Python 1600XP
Well, there's not too much to look at on this output wire. There is a tiny 5-pin plug on one side of the brain. Well, there is a little blue/white wire that has a neg. output. You will need to use a relay no matter if you need a - or + output.
Now, if you use this circuit, it will work always every time you remote start the car. So, if you like to use the RS in the summer, it will work. Personally, I like to use the 2nd channel output (red/white wire on main harness) as the defroster trigger. Reason is that YOU can control it to come on or off via remote. Of course you can only use it if you do not have power trunk release because that's what this circuit usually is for.
Pretty sad that your DEI dealer passed on a few extra $$ unless your car isn't compatible to do this. Some cars especially european cars can be very difficult to do this on.
|