|
Re: '89 Voyager SE - runs ragged when starting
You should get the diagnostic codes from the computer. Sounds like a sensor has done bad.
Chysler computer codes (80-95 Chysler's):
Chysler faults codes are stored in the computer for up to 50 ignition starts. Each code is two digits.
The code's meaning (i.e. faulty sensor) can be found by doing a web search using keywords
"Chryler computer codes".
To obtain codes: Turning the ignition key on-off-on three times (don't start the engine) will put the
computer into diagnostic mode. Watch the "check engine" light. Count the flashes for each digit which is followed by a pause between digits. Two digits to a code with the end of the list being code 55.
To reset the codes, turn the ignition key on-off-on
50-55 times (don't start the engine).
|