Hi guys, swapped a 92 B18 (obd1) into a 91 Hatch (obd0), and it does everything except it has no injector pulse. The harness was converted by Hasport, and the OBD0-OBD1 jumper was purchased from TNT Cable.
When you crank it with the key, then it just cranks over. I've read all the horror stories of loose connectors after conversions, so I was checking it out. found out that if you put a test light on the white wire going to the distributor, and used a remote starter (manually engaging the starter), then the car will run. If you use the key, it will not.
Please help. Thanks.