Quote:
|
Originally Posted by richtazz
to relace the o-ring Jeffco describes, take the air intake tube off the throttle body and you should see it. The fel-pro part # for the o-ring is 70800, and I also use a 70194 flat paper gasket between the top of the block and the oil pump drive for extra insurance. They are available at any auto parts store for less than $2 each, and pick up a throttle body mount gasket too, as you need to remove the throttle body to get clearance to remove the oil pump drive. You didn't specify the year of your car, so I can't give you the T/b mount gasket number, as they vary slightly from year to year.
|
I have a 1995 i dont really think that my o ring is on the driver side because thats where my air intake unit is at and my oil pan botom is the passenger side that is what is soaked in oil