[quiXilver]

Go get yourself a timing light from autozone, start the car up, and there should be 2 marks on your cam gear, when the light flashes on the cam gear, the two marks should line up horizontally with the block maybe even slightly tilted towards the front of the car if I can remember the si is a little different. And also, look down at your crankshaft pulley, there should be 3 marks by themselves, and then one white mark (towards the back of the car) on the pulley. Right above the crankshaft pulley there should be a crosshair looking extrusion from the timing belt cover. When you have the car running and the light should blink when the middle of the 3 lines are in the "sights."