View Single Post
  #6  
Old 09-16-2004, 02:18 PM
StealthSonic StealthSonic is offline
AF Regular
 
Join Date: May 2001
Posts: 221
Thanks: 0
Thanked 1 Time in 1 Post
Re: Stereo installation

there are 2 screws under the center console dash. And the clock unit can be taken off by gently yanking it out with a screw driver.

Then unplug the clock unit and there's a screw inside the dash, take that screw off and the dash can be taken out. Its easier to unplug AC etc off the dash so you can completly remove the dash out of your way instead of having it hanging and blocking you. Then everything else is easy from there. I believe there are about 4 more screws that are holding the stereo. I recommend magnatic screw driver when you are taking out the brackets that are holding the stereo.

Then you will need to purchase a stereo harness... they aint cheap... I did it without it. If you need a diagram, I'm happy to provide you one. I have written it down what each wires do. But I have 2000 Accord, so I hope they are the same.
__________________
http://importfan_accord.homestead.com/files/New_Page_Accord.jpg
Reply With Quote