|
Re: rear brakes stick
To answer your questions, I need some more information to clarify the situation.
are the front brakes dragging or the rear?
Which brake hose did you replace? where is it located?
It seems like you have worked on the rear brakes. Did you replace the wheel cylinders??
Are the park brake cables still attached?
Both of these can keep the back brakes partially applied if they are seized.
There can be a problem caused by incorrect master cylinder instalation but it seems that the problem existed before you changed it, is that right???
If you will reply to the 5 questions, it will help to track this down for you.
JD
|