View Single Post
  #2  
Old 09-08-2004, 10:26 PM
MagicRat's Avatar
MagicRat MagicRat is offline
Nothing scares me anymore
 
Join Date: Dec 2003
Posts: 10,702
Thanks: 12
Thanked 82 Times in 77 Posts
Re: knocking sound in engine

6 cyl, right?
Is it a knocking noise and not a valvetrain 'tapping' noise?
These Jeep engines are notorious for developing a piston slap, yet they will run very reliably for years while still making a noise. The piston slap is most noticable on cold start up and deminishes a bit.
Later Jeeps had a redesigned piston which reduces this problem.
Otherwise, it could be a rod (bad bearing) noise.
These noises are much more noticable at idle and under load. Engines don't last very long if a bearing is bad, and an engine rebuild is required.
Sometimes a worn oil pump can allow for a bad bearing noise only at idle when the engine is hot.
Thicker oil can help temporarily, but a new oil pump is usually the solution here.
Reply With Quote