[busa_4]

the solenoid most likely failed. there is a 1% chance of the wiring being an issue. the only time i ever see a wiring issue is if the car sits too long and rats start eating the harness. happens more than you think. well at least here in florida. do you have an ohm meter? ohm out the solenoid via the connector. if you get an "OFL" reading the solenoid has an open circuit. if you get a "0.01 or 0.00" reading than the solenoid has a short. you will have to remove the cam cover to remove the solenoid. also change the solenoid seal while you are there. good luck!