View Single Post
  #5  
Old 09-01-2004, 10:19 PM
who fan who fan is offline
AF Regular
 
Join Date: May 2004
Posts: 126
Thanks: 0
Thanked 0 Times in 0 Posts
Re: Re: Ways to protect the transmission

Quote:
Originally Posted by conncarl
Personally, I always avoid power flushing a transmission. I've seen too many transmissions fail within days of a "power flush".

If yours is a 99, you should be using Chrysler ATF+4 fluid. D-C represents this to be a "lifetime" fluid. Whether or not you believe that there can be any such thing as a lifetime ATF does not really matter, since the filter can and will become clogged with contaminants fairly quickly.

My suggestion is to perform a transmission fluid and filter change every two years or roughly 30,000 miles, whichever comes first. This is not as aggressive a schedule as it might seem, because you are only replacing the fluid in the pan, not draining the torque converter.

Whether you perform this service yourself or take it to a shop, make absolutely certain that genuine Chrysler ATF+4 is used. Many of the well-known problems with A604 and 41TE transmissions are related to shops (and owners) using cheaper Dexron fluid rather than the correct +3 or +4 ATF specified by the manufacturer.

I would also suggest a genuine Chrysler filter, since there is some confusion out there with aftermarket filters and I have seen clone filters with fitment problems. Besides, the real McCoy is only about $8 or so.

Another tip is to buy a good quality pan gasket from an auto parts store, since D-C does not sell one. They suggest using Black RTV sealant, which, in my experience, does not work as well and will often complicate future fluid changes.

Heat is indeed a transaxle killer, but unless you are going to tow with your Caravan or routinely carry very heavy loads, I would not install a cooler. Introducing a cooler into your system can actually add potential leak points, a common cause of transmission problems. You could try finding a slightly cooler thermostat for your Caravan. That would keep the coolant (and the ATF) cooler and extend its life, without the added complexity of an external cooler. Just be careful that you do not go any more than 5 to 10 degrees cooler than the original stat, or you may have trouble with your ECM.

Good luck! Carl

I second this 100% . Still most Mechanics think Dextron is a multi purpose fluid. NO WAY! not anymore.
Reply With Quote