Quote:
|
Originally Posted by pweiproduct
is that the exact part number i need? ie: is it going to be an exact replacement? or do i have to get some other stuff and some duct tape/hack saw to make it fit?
|
No, it's not.. and only because more info for your car is needed. If you're car is VTEC or and "ex" like mine, OEM exhaust came with a different dual tip muffler, usually a little bit more expensive then the LX,DX... that's the $114. If you have a LX or DX probably going to be around $91. The only other thing you will need would be to replace the gasket between the resonator and the new pipe about $5. Tools needed:
Liquid Wrench
12mm socket and wrench
14mm socket and wrench
30minutes tops
Make life a little easier spray the hangers with liquid wrench too and they will come out of the rubber hangers alot easier. When you reinstall it, I put some mulitpurpose grease on the hangers to make them slip in real easy. Goto a Napa and just ask them and make sure you tell them what trim your car is to get the right thing. Easy as pie!.....