|
Re: Tranny
There Is No Drain Plug. You Have To Remove 1 Side Of The Pans Bolts And Loosen The Other Side Of The Pans Bolts And The Fluid Should Start Draining. When It Stops Then You Can Remove The Remaining Bolts. Beware The Pan Is Still Full So Have A Drain Pan And Plenty Of Rags Available Cause Your Going To Spill Some. After The Pan Is Off And Out Of The Way The Filter Just Pulls Off. Becarefull There Is A Seal At The Top Of The Filter. Make Sure You Remove The Old Seal Before You Attempt To Put The New Filter And Seal On. Most Of The Time It Doesnt Come Out With The Old Filter You Will Have To Use A Pocket Hook Tool And Remove It. If You Dont Have A Hook Tool Bend A Peice Of Metal Such As A Cloths Hanger. Good Luck!
|