View Single Post
  #5  
Old 08-23-2004, 10:18 PM
artrageous artrageous is offline
AF Newbie
 
Join Date: Aug 2004
Posts: 66
Thanks: 0
Thanked 0 Times in 0 Posts
Re: Re: rear lamp failure error message

Quote:
Originally Posted by xj31
are you sure that there are no lights out?pay attention to the third brake light because it has 3 bulbs and if one is outit will give you that message.also make sure that all of the bulbs are the right ones.i've seen a lot of people swear that there are no bulbs out when one of the third brake light bulbs is out.another common thing is if there is trailer wiring that can cause problems especially if it is aftermarket or if it gets corroded.i'm just saying be 100% you have eliminated everything before you replace the lamp outage module.im a tech at a jeep dealer and i have never seen a lamp outage module go bad yet.thats not to say it never happens but i work in a shop with 15 techs and its all jeeps and i have never seen it
Thanks for the advice (my 95 is showing the same error). Since all appear to be working (I've checked a couple of times) it's worth checking the 3rd brake light with the 3 bulbs. Is it relatively easy to get into this?
__________________
Sharon
www.art-rageous.net
Reply With Quote