Quote:
|
Originally Posted by zol
Had the same prob on my '92 although my wife's 95 is good. I am a cheapskate by nature so after I had tracked it down to the switch(which showed evidence of a lot of arcing/burning), I cleaned the contacts & put it back together. Been running ok for the last 18 mths....
|
Zol, I just wanted to thank you for the advice. I had similar prob. where both low beams went out but highbeams were fine. I disassembled the light switch in the column, removed the plastic cover from the back of the switch and used sand paper to clean the contacts*very carefully I might add*.. and they came on like a charm... It is truly a blessing to have other Americans looking out for the rest of us. I do appreciate the help. Eddie