The program button is well hidden. It can't really be seen, but must be felt. Once you have the glove box out, look for a bundle of wires running up to a connector just under the dash, right behind where the latch for the glove box used to be. If you put your right index finger on one side of the connector, and your left index finger on the other side, the left index finger should be able to feel the program button. It's a tiny thing, with a ring of plastic around it. Pushing it means pressing your finger toward the back of the vehicle. With the key in the "on" position, push the program button; the locks will lock and unlock to indicate that you're in program mode. Push any button on your remote within 10 seconds, and the locks will lock and unlock again to confirm that it's been programmed. If you have another remote, push any button on it within another 10 seconds to program it, and repeat for up to 4 remotes. Turn the key off, and confirm that all your remotes are working properly.