View Single Post
  #3  
Old 08-18-2004, 02:40 PM
bigrod118's Avatar
bigrod118 bigrod118 is offline
AF Enthusiast
 
Join Date: Aug 2003
Posts: 849
Thanks: 0
Thanked 1 Time in 1 Post
Re: 91EGT Bumper Removal

no special tools. take off the corner lights, 2 screws, then take off the headlights, 5 bolts on each, 10 mm, if im not mistaken. you dont have to unplug them, just twist them and set them on top of the frame there. now unplug the wires to the fog lights if there there. and right underneath where the headlights were, you'll see 3 bolts on each side two on the inside on the car next to the frame, and one on the outside side of the car next to the frame, those are 13mm if im not mistaken. take those 6 bolts total off and wiggle a bit and pull and off she comes. just remember when putting it back on that there are retaining washers on the sides there that the groove in the bumper have to go back on.
Reply With Quote