|
Re: tranny mount bolt broken
Hmm.. an easy-out should take care of the broken bolt leftovers. Failing that you can drill it out and re-tap the hole and replace the bolt.
Same with the CV boot. Just pull the axle and replace the joint-if it's been running uncovered-it's got crap in it and is probably damaged. If there's no slop in the joint-you can wash it out with any good parts cleaner-repack it with CV joint grease and install a quick-boot kit on it. The quick boots don't last as long as the originals, but they're effective for a good while.
|