|
there are several things that could be wrong,,,,all of them require the
trans to be taken out and looked at. The "413" 3 spd is not a real HD
transaxle,,,,and if it has had a hard life,,,,"tranny-in-a-can",,,,,is not
going to solve the problem.. There won't be much for codes,,,the valve
body in the trans is mostly hydraulic,,with minimal amount of electronics.
The oil will be thin if you installed mopar+3,,check oil reccomondations
on dipstick,,,,this should be using dextron III or mercron III,,,unless you are in a really cold climate,,,either way ,,the oil won't be the issue.
|