|
Re: Tranny shifts fine when engine is not running but, shifts hard when engine is running
Well guys, it seems as if you are understanding my problem backwards. The car shifts fine when the engine is turned off. It shift very hard, and does not go into reverse when the engine is running. a new clutch cable was used, all adjustments made properly, the flywheel bolts all torqued properly, the proper kind and amount of oil was used for the tranny oil change, all bearings were lubricated, and all other torque figures observed. Is there anything else that could be the cause? I'm now two weeks without my REX..... Gas is killing me in my truck. help!
|