|
Re: 1995 keyless entry and touch pad entry not working
The Keyless Entry Controller (module) for 1995 is inside the drivers door. There will be a code sticker on it. If the sticker was removed you can still ascertain the code by opening the module and "reading" the pattern of the code-set resistors, how their soldered onto the circuit board.
If 7/8 9/0 aren't working I'd suspect the module went bad, it's disconnected, or possibly the keypad is partially disconnected ? If it lights up when depressed, i'd suspect the module first.
__________________
-Steven
1996 Town Car, Cartier
|