Thread: '91 Bonneville Keyless Remote Programming
View Single Post
  #2  
Old 07-23-2004, 01:21 PM
randman1's Avatar
randman1 randman1 is offline
AF Enthusiast
  
Join Date: Jun 2004
Posts: 387
Thanks: 0
Thanked 0 Times in 0 Posts
Re: '91 Bonneville Keyless Remote Programming
  1. Turn Ignition Switch to OFF.
  2. Jumper Program Connector terminal A (PPL/WHT) to terminal B (BLK/WHT). Door locks will lock and unlock in approximately 2 seconds.
  3. Press Unlock Button on one Transmitter. Door locks will lock and unlock in approximately 2 seconds. The first Transmitter is now programmed.
  4. Repeat step 3 using other Transmitter. If only one Transmitter is being used, go to step 5.
  5. Disconnect jumper from Program Connector.
The Program Connector is clipped to the metal support that is seen on the left side of the glove box opening.
Reply With Quote