Quote:
LS1 into a F-body '93 - '02 Parts needed:
LS1 and V8 Transmission (none of the F-body
V6 Transmissions will work behind the V8)
V8 Front Suspension Crossmember $150
(Each engine had different motor mount holes)
V8 Heater Hoses $40
Will need '97 Corvette fuel rails or rails modified by Street and Performance
to hook up the stock lines or an external pressure regulator.
Due to electronics changes from year to year and difference in V6 & V8 cars,
it is impossible list all the different changes and mods that would be required
to be made to install the LS1 in a V6 or LT1 car.
|
http://www.hpsalvage.com/st.htm
Do you think that's fairly accurate? How hard would it be to change the engine mounts and all to put a ls1 like this one
http://www.gmpartsdepot.com/store/pr..._ID=2&src=gls1
What problems would i run into?