[tkmww]

Here are the problems that I have noticed with the car. First of all I have replaced the following: wires and plugs, dist cap and rotor are pretty new as well. The distributor bearing seems to be in good shape also. Did a compression test on all the cylinders and they are all around 170psi. Here is what is happening; when doing slow acceleration or holding a constant speed it seems to be hesitating. Usually it starts doing it around 2000 rpm. It’s a sputtering feeling; people said they could hear the sputtering through the exhaust. It doesn’t sputter when at idle or when under hard acceleration, only when doing a slow accel or holding at a steady speed. It feels to me like something is missing or not timed right. It failed emissions because HC ppm and CO% were to high at 25 mph at 15mph it passed. Any help would be greatly appreciated.