[Belldandy]

They are easy. Very easy. I just put mine in for my car like 2 days ago and put some for my friends car a week ago. First you dissconect the hose from the washer jets. Then the stock washer jets are like clips so you squeeze the back and the front of the washer jets to release them This is underneath the washer jets. After you remove everything, you put in the new lighted jets and screw everything in and then you can decide whether to tap into your head lights or your fog lights and if yours have a 3rd wire tap into your blinkers. I taped both of my washer lights to one of my head lights which is the passenger head light since the driver side headlight was hard to get to. I used these things called T-Tap which made everything easier. You can try removing the insulation on the wire and tap into it that way and tape it up.