Quote:
|
Originally Posted by Posey88cvic4dr
Ok, i just need a quick list of everything I am gonna need for my ZC swap. I'll be ordering it in 2 weeks, once i get my pay check. I've gone threw and i'm pretty sure I know what I need, but if someone could just make a list of EVERYTHING I am gonna need to do this swap i would really appreciate it.
Keep in mind that i'm and Automatic  |
first i would be good to know what model you have...so we can tell you of all the parts your going to need to switch from dpi to mpfi
if you are going to go mpfi i believe you are going to need
intake manifold
injectors
fuel rail
injector resistor box
engine harness
Si/ex dizzy
Si/ex ecu
geez...i know there is something im forgetting....its been a while since i swapped to mpfi
for a 5sp swap your gonna need
tranny
clutch cable
clutch assembly (it has the clutch and the brake peddles on it)
if your car is a std your going to need hubs and half shafts from a dx/lx/si/ex
i think you need the trans. mount from a 5 speed, but i might be wrong
as far as the actual engine goes, when i helped my buddy swap his, we used a d16a6 dizzy and ecu, im pretty sure everything bolted and plugged right up after that, exept, we had to get a new tps (seems like a common problem with zc's)
im sure im forgetting tons of stuff so wait for someone who has done this recently to reply before taking my advice, as it has been a good 4 years since i touched a 4th gen