GMCTech,
Thanks for your reply, but that isn't the problem. I think that I have a relay problem since the solenoid is bidirectional (2-wire solenoid swaps polarity to change direction of accuater). I have however been WRONG before so I used your suggestion and tested the solenoid by grounding one of the leads. Unlock works, I then grounded the other lead and lock works. My test lead got hotter than hell!! This also makes me think that the relay (wherever that might be) has a contact that is not operating properly, as I said before I have already changed the one relay I could find. Thanks for your input. More info and/or schematic would be greatly appreciated.
