Quote:
|
Originally Posted by tardster
Ok guys I looked at tranny pans on ebay and matched up the tranny thats in my 88. Its a 700r4. I want to put it in my 82 that has a 350 tranny in it. Someone mentioned a tv cable and I dont know if my 82 has one or not plus most of the computer stuff was removed once the carbed 350 was dropped in her. I have the 700r4 plus the driveshaft, converter, and flywheel. Also someone said I would need to move my crossmember a couple inches. The main thing im worried about now is the tv cable and making sure it works correctlly, also someone said something about a lock-out? Any help is appreciated. Thanks
P.S. I know this is a question asked alot but please be nice....LOL
|
your 82 should have a kickdown cable with the th350.... it goes right up to the carb linkage..the 700r4 tv cable goes up to the carb linkage also... 68chevelle is good at this stuff....and yes your cross member will need to be moved back a little bit for the 700r4..and yea go to
www.bowtieoverdrives.com and i think 69chevelle has a few other websites... it tells you on there how to adjust it and its important to adjust it correctly or it could result in tranny damage...does you 700r4 have a stock converter?? if you get an aftermarket stall you need to install a lock up kit.... i never ran one with the stock converter..you to that website for more info