|
Re: Lowering Springs How-to...
u need a manual or someone that knows how to take the strut assembly aloose from the car...
to take the spring off....u need a wrench, allen wrench and spring compressor...
u 1st have to take the tire off...then pop the hood...locate the 2 bolts holding the strut in from the top, then look at the bottom of the strut assembly and take that bolt off...but put the spring compressors on 1st...and that's it
to do the rear...take the tires off...put the spring compressors on...pop the hatch/trunk and located the bolts holding the strut assembly in...take those off and then locate the bolt holding it in at the bottom and take that off...
to put it back on...just work in reverse...the front will be more tricky...my 1st time it took me like 4 hours b/c the fromt kept messing me up and i really didn't know what i was doing...the 2nd time took me like 45 minutes
__________________
The name's Adrian
1990 Civic HB Si - 265.7whp/223tq @9.2psi. Tuned on NepTune by J.Mills
1991 Civic Sedan DX - 296.3whp/230tq @1bar. Tuned on NepTune by J.Mills
1991 Civic Sedan DX - 185.8whp/139tq. Tuned on NepTune by J.Mills
2006 G35 Coupe 6MT - Stock
2011 CR-Z - Stock
|