|
Re: help with cvjoints
it is a little bit of work, the two biggest complications will be separating your lower ball joint, if it is really stiff (as they often are) it will turn a 45 minute job into a 2+ hour job, the other is the cv nut (the one in the center of the wheel) they usually are very tight and you will need a good impact wrench to remove it, i have broken a 1/2" wrench and a 1/2" breaking bar trying to remove one before. if you can get around these two complications it's a pretty basic job.
__________________
~Attention! if you are thinking about a D16A1 swap for your Civic/CRX and don't know where to start go Here. Thanks.~
|