Quote:
|
Originally Posted by hkdonfishn
I went home yesterday and pulled the plenum off and low and behold you guys are good. The passenger side was washed. I am going out today to buy the complete kit fuel regulater and nut kit. AutoZone has it for $270.00 for the fuel regulater I have to check the Nut Kit price. Also wanted to no a little about the seafoam. I looked it up on the net and from what was said it works good. My only concern would be. Will I have to change the O2 sensor and my Boshe Plugs that I just installed 200 miles ago? And also what would be the best way to put it into the intake would it be to funnel it into the brake pressure hose on the back of the plenum? Thanks for all the help saved me alot of $$ all this work can be done on my own very simple.
|
The nutkit is a dealer item only, will runyou between 45-65 bux.. As to the seafoam, pour 1/2 the can into the brake booster line, immediately turn off the engine, let sit one hour...Pour other half of can into the crank case..Do oil change at 500 miles.. After the hour is up, drive the truck normally, don't punch it... You will probably smoke like a bandit, 5 miles should clear it out. You probably won't foul your plugs bad.. After you're done though, pull and clean the egr with a wire brush and carb cleaner, before putting it back on, run the engine and rev it a few times for about a minute to spew any carbon out of the egr port on the manifold..