[akmadmike]

All, Great thread.

I have the same problem mentioned above.
Fan not coming on. Tested fan straight to battery ok.
Manual states that good fan should run when temp sensor is unplugged
if bad sensor. Does this sound right? Did not work for me.
Am looking at the relays next? There are 4 on driver side fender panel.
Anyone know which are for fan? Have seen posting on high and low speed reply? Would fan work on just one good relay?

I also noticed that when overheating occurs the overfill bottle fills up.
Is this an issue? I did not know if the temp sensor is behind the
thermostat and the thermostat does not open whould this cause
the sensor to seem bad not allowing fan to run?
What other things would indicate a bad thermostat?

Thanks for any help,