Re: dash lights flashing after battery change
I keep reading people saying push the top and bottom buttons on the left. That is wrong. Start the vehicle, turn the fan on high and the vent selection switch to dash. Thats the one that blows at your chest and face. put the temp control on cold. hold bottom left and bottom right button in till the lights go solid. release while they are solid. the module will now program itself by cycling through all the vent settings. all the lights will go out in about 2 to 3 minutes except the top left one. it will flash slowly. push this button once and it should go out. you are now finished. I had to do it twice before it worked so don't be discouraged.
Good luck
|