[aperry20]

Try this also........mjgjr72 wrote this


you have to do all receivers at once. once reprogram mode is entered it erases all stored remotes
1 start with ingnition off, hold down the power unlock button on door panel. turn ignition key on,off,on,off, release power unlock button on the door panel. the locks will cycle once.

2 hold down the keyless entry transmitter lock and unlock buttons for 15 seconds. the locks will again cycle once.

3 repeat step 2 for each additional keyless entry transmitter.

4 turn ingnition on to exit the keyless entry transmitter proggramming mode.

check funtion of remotes

the second method requires scan tool

--------------------------------------------------------------------------------