View Single Post
  #3  
Old 05-05-2004, 12:55 PM
acm73 acm73 is offline
AF Newbie
Thread starter
 
Join Date: May 2004
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Re: Re: Engine runs horribly on acceleration after Crank sensor replacement

Thanks for answering. It still ran fine after the starter fluid other than it shut down again. He did mention the timing and that that was what it sounded like to him when we picked it up from the dealership yesterday. As of this moment it is still sitting on the trailer and will probably stay there until he gets his truck put back together this week. Thought I would in the meantime see what other info I could reap.





Quote:
Originally Posted by leowolf
Classic symtoms of cam\crank timming jump, when your hubbie sprayed the starter fluid in there it caused a pre ignition back fire, the motor tries to go the wrong direction qite ubruptly, and because the timing chain is worn out it jumped a tooth. sorry for the bad news. if your hubby is a mechanic he should be able to do the job if he has the right damper puller and text. make sure he gets a good manual for the jeep and follow the step by step.

leowolf
Reply With Quote