View Single Post
  #10  
Old 05-02-2004, 11:12 PM
chevytrucks92's Avatar
chevytrucks92 chevytrucks92 is offline
AF Enthusiast
 
Join Date: Mar 2004
Posts: 1,658
Thanks: 0
Thanked 0 Times in 0 Posts
Re: Re: Gear suggestions plz

Quote:
Originally Posted by 351wStang
Car weighs about 2500lbs. Lx trunk car, 4cyl.
well if it will make 550 hp at the back tires then its gonna do alot better then high 10s!! But you might as well plan on shelling out the $$$$ if you plan on making a 351 do that! (ex: this winter we spent $2400 on just the bottom end+valve job and valve springs(probably $400) for a 406 small block Chevy, and that is not even counting the cam, becuase it was still good and the shop that did ours estimated it to have 550-600 hp at the flywheel)
__________________
**1966 Chevy II**

355 SBC, Turbo 400, 5.13 gear, IHRA Certified to 8.50 in the 1/4
Last Race (10-6-07) So its been awhile...
Dial: 6.77, RT: -.0001, 60': 1.4360, 1/8th: 6.7942 @ 100.65 mph
Fastest Pass of '07 (10-6-07)
60': 1.4360, 330': 4.3453, 1/8th: 6.7942 @ 100.65 mph


25 and in BIG TIME Debt Crew member #2
Deuce's Wild Racing: Take a Ride on the WILD SIDE
Reply With Quote